A practical guide to winterising your pool heat pump
Prepare your heat pump for winter in simple steps. Follow our guide to achieve optimal performances in the spring. Read now!
A practical guide to winterising your pool heat pump
With the arrival of winter, it is crucial to prepare your pool heat pump for the cold months to come. By winterising this essential item of pool equipment, you guarantee not only that it will operate correctly when reopened in spring, but also that it will last longer. Here is a step by step guide to winterising your heat pump effectively.
Why should I winterise my pool heat pump?
Winterising your heat pump is a necessary precaution in order to protect the internal components from damage caused by ice and humidity. This procedure will ensure that your pump remains in perfect condition and ready to operate as soon as the warm season returns.
Reduce energy bills
Winterising your heat pump will reduce its electricity consumption during the months when it is not is use. This reduces your energy bills and optimises your expenditure. H3: Make your equipment last longer Winterising protects the components in your heat pump, in particular the compressor and exchangers, against premature wear due to difficult climate conditions, such as ice or long periods of humidity. A regularly-maintained heat pump will have a much longer lifetime, avoiding the need for costly repairs or premature replacement of the equipment.
When should I winterise my pool heat pump?
Your heat pump must be winterised when the swimming season is over and seasonal temperatures begin to drop. Generally, this operation is planned for when the water temperature drops below 15°C. By anticipating winterising, you will protect your equipment against ice-related risks and extend its lifetime. A well-maintained heat pump will be ready to operate effectively as soon as the warm season returns.
Winterising your heat pump in 4 steps
Step 1: a deep clean of the heat pump is required
Before putting your heat pump into hibernation, give it a good clean. Remove all dirt, debris and dead leaves that may have accumulated. Use a jet of soft water to rinse the exchanger flaps. This will maintain optimal air circulation and prevent the accumulation of dirt which could damage the internal components.
Step 2: turn off the electricity supply and drain the pump
Make sure you turn off the electricity supply to your heat pump before starting to winterise it, so that any risk of starting it up accidentally is eliminated. Then, isolate the heat pump using the valves fitted for this purpose. Unscrew the hydraulic connections so that stagnant water does not turn into ice crystals and damage the internal components. For certain heat pumps, it is also necessary to remove the drain plug. To evacuate the rest of the water in the condenser, use a blower or a tea towel to absorb the residual water.
Step 3: protect your pump
Your heat pump deserves to be tucked up snugly for the winter! Once the pump is clean and has been drained, cover it with a suitable protective cover. This cover protects the unit from bad weather and the build-up of dust, guaranteeing that even the most robust heat pumps are suitably protected. This also prevents frost or humidity accumulating on the external components.
Step 4: dream of the summer
So, your heat pump is ready for winter. Now, all you have to do is dream of warm summer days, when your pool will again be the centre of attention. And don’t forget, a well-maintained heat pump will guarantee you trouble-free bathing seasons for years to come. Winterising your heat pump is not just a practical obligation, it is an act of love for your pool. By following these simple steps, you ensure optimal performance and improved durability. So, make the winter your ally and give your heat pump the rest it deserves. Happy winterising, and we will see you soon by the pool!
Discover our Hayward Full Inverter heat pumps
Full Inverter technology in heat pumps allows the pump power to be adjusted continuously in response to the pool heating requirements and weather conditions. Unlike classic systems which operate at full capacity or are switched off, Inverter technology precisely adjusts the speed of the compressor and fan to maintain a stable, optimal temperature. This results in an increase in energy efficiency, with energy savings of up to 30%, quieter operation, and a longer lifetime of the components.
The Hayward S-Line Pro Fi heat pump is a compact but powerful model, equipped with Full Inverter technology. It provides optimal energy performance by continuously adjusting the heating power to meet the actual requirement of the pool. Ideal for small spaces, this heat pump performs effective and silent heating, combined with easy installation and maintenance. It can be managed easily using its intuitive touchscreen, and its Wi-Fi compatibility offers the practical option of remote management via the dedicated app.
Hayward’s SumHeat Fi heat pump is specially designed for large pools and difficult climates. With its Full Inverter technology, it produces a rapid rise in temperature and remarkable energy efficiency, thereby saving energy in comparison to classic heat pumps. This model is also compatible with remote management via the mobile app, and therefore can be controlled remotely.
Hayward’s EnergyLine Pro Fi heat pump is a cutting-edge model which combines Full Inverter technology for optimal energy performance. Adapted to large size pools, its power can be modified to suit specific requirements and weather conditions. Its auto-adaptive de-icing system and silent operation in night mode make it an ideal choice for user comfort all year round, even in extreme conditions as low as -12°C. Additionally, thanks to its advanced control screen and Wi-Fi compatibility, remote management and diagnostics are made easier, improving flexibility and simplicity for users.
Hayward’s EasyTemp Fi heat pump offers a pool heating system that combines simplicity and efficiency thanks to Full Inverter technology. Designed for small to medium pools, it produces a rapid rise in temperature and precise heat regulation. It is particularly pleasant to use due to its silent operation. The EasyTemp Fi is also compact and easy to install, which makes it an accessible and practical option for users. Parameters can be adjusted and performances monitored easily via its intuitive user interface and touchscreen. In addition, it is compatible with remote management using the mobile app, which simplifies control and maintenance.
Do you have any questions or do you need additional assistance regarding heat pumps? Go ahead and take a look at our FAQs.
You will like also ...
ALL NEWS